FLUKE NETWORKS DSX2-5000 INT VERSIV 2 CABLEANALYZER COPPER CERTIFIER WITH INTEGRATED WI-FI MODEL # DSX2-5000 INT

AED 0

  • Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
  • Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
  • ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly

FLUKE networks

  • Brand

    FLUKE NETWORKS
  • Model Number

     DSX2-5000 INT

   add to cart

Share on:

  • Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
  • Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
  • ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
  • Taptive™ user interface simplifies set-up, and eliminates errors
  • Analyze test results and create professional test reports using LinkWare™ management software
  • Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
  • Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
  • Copper cable certifiers endorsed by cabling vendors worldwide
  • Built in Alien Crosstalk testing
  • Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management Software

Shielded and unshielded pair LAN cabling

TIA Cat 3, 4, 5, 5e, 6, 6A, 100 Ω ISO/IEC Class C, D, E, EA, F, FA and I/II: 100 Ω and 120 Ω

Standard Link Interface Adapters

Permanent link adapters

Plug type: shielded RJ45

Optional Plug type: Tera

Channel Adapters

Jack type: shielded RJ45

Optional Jack type: Tera, GG45

Test Standards

TIA

Cat 3, 4, 5, 5e, 6, 6A, 8 per TIA 568 Series

ISO/IEC

Class C, D, E, EA, F, FA, I/II certification per ISO/IEC 11801 Series

Maximum frequency

DSX-5000 1000 MHz

General Specifications

Autotest Time

DSX-5000: Full 2-way Autotest of Cat 5e or 6/Class D or E: 9 seconds Full 2-way Autotest of Cat 6A/Class EA: 10 seconds

Support test parameters (The selected test standard determines the test parameters and the frequency range of the tests)

Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Insertion Loss (Attenuation), Return Loss (RL), NEXT, Attenuation-tocrosstalk Ratio (ACR-N), ACR-F (ELFEXT), Power Sum ACR-F (ELFEXT), Power Sum NEXT, Power Sum ACR-N, Power Sum Alien Near End Xtalk (PS ANEXT), Power Sum Alien Attenuation Xtalk Ratio Far End (PS AACR-F)

Input protection

Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage

Display

5.7 in LCD display with a projected capacitance touchscreen

Case

High impact plastic with show absorbing overmold

Dimensions

Main Versiv unit with DSX module and battery installed: 2.625 in x 5.25 in x 11.0 in (6.67 cm x 13.33 cm x 27.94 cm)

Weight

Main Versiv unit with DSX module and battery installed: 3 lbs, 5oz (1.28 kg)

Main unit and remote

Lithium ion battery pack, 7.2 V

Typical battery life

8 hours

Charge time*

Tester off: 4 hours to charge from 10 % capacity to 90 % capacity

Languages supported

English, French, German, Italian, Japanese, Portuguese, Spanish, Chinese, Korean, Russian, Trad Chinese, Czech, Polish, Swedish, Hungarian

Calibration

Service center calibration period is 1 year

Integrated Wi-Fi

Meets IEEE 802.11 a/b/g/n; dual band (2.4 GHz and 5 GHz)

Posthemes

09/07/2019

demo

That's OK!

Add a review

Your email address will not be published. Required fields are marked